How to Use Switch with Modchip

The switch is an interesting device, or rather several devices that have been attached together in such a way to allow a user to control the system through it. This allows the user to turn their console on and off while also being able to change games without powering down the system.

On the outer part of the console, locate the serial number

If you have a PlayStation 2 Slim, this is located on the left side of the console. If you have a PlayStation 2 Fat, this is located on top.

On the inner part of your PlayStation 2 console, locate the model number and date code. You can find this directly under where your hard drive would go if it were present. You should see two numbers separated by a dash. The first two numbers are your model number and the second set are your date code.

On your Windows computer, download WebCFWloader from GitHub

If you’re using a modchip, you’ll need to use WebCFWloader.exe , which is available for free on GitHub. If you’re using a PlayStation 3 or Xbox 360, you don’t need to download anything; just plug your console into your computer with a USB cable and follow the instructions below.

Note that if you’re using a PlayStation 4 or Xbox One, WebCFWloader won’t work because those consoles don’t have USB ports. You should instead follow the instructions provided by your modchip’s manufacturer.

Connect your Switch to your computer with a USB cable

To use the switch with modchip, you need to have a computer that has Windows 7 or later installed on it. The computer should also have a USB port and an SD card reader. Once you have this, you are ready to proceed with the steps below.

1. Connect your Switch to your computer with a USB cable.
2. Inject the modchip into your Switch’s NAND memory chip (this is where all of your save data is stored).
3. Go to the home screen on your Switch and tap “System Settings” on the top right side of the screen.
4. Select “Dev Options” from this menu and then select “Firmware Update Device” at the bottom of this menu list.
5. Select “Update Without PC” if you don’t want to update any other files than firmware itself (this is highly recommended). If you want to update other files as well, choose “Update With PC” instead. You should now see a pop-up window asking for permission to connect your Switch via USB cable so that we can update our device firmware using our computer! Give permission by pressing “OK” and wait for your device

Open WebCFWloader.exe

• On your computer, open WebCFWloader.exe. If you are prompted by User Account Control, click Yes.
• In the top-right corner of the program window, select your region from the dropdown menu.
• Click Browse and select your game file (EBOOT.PBP). The program will now load up your game files. If everything is done correctly, you should see an SSOCC logo appear in the top-left corner of the screen.
• Now you must insert your switch into USB mode; this can be done by holding down volume + and – while plugging in your switch to PC using a USB cable
• . Now open VBA-ReRecording and wait for it to detect your device as shown below:

Click Send to send the payload

• Make sure your console is updated to firmware version 5.0.2 or above. If it isn’t, follow our guide here to update to the latest firmware.
• Download the Switch “Odex” payload from here and save it on your computer’s desktop.
• On your PC, open up Powershell by hitting Windows key + X then selecting PowerShell (Admin).
• Once Powershell is open, type in cd /d c:usersyourusernamedesktop and hit Enter to change directory (cd) to your desktop folder. Type in powershell -ExecutionPolicy Bypass -NoProfile -NonInteractive -WindowStyle Hidden -File “c:usersyourusernamedesktopSwitch_Odex_Payload_V1_1.ps1” and hit Enter to run the script file that will send a payload to your Switch’s SD card. Wait for it to finish sending before moving onto Step 3!

You can use switch now with modchip

Switch modding is a process that allows you to use the Switch online without any restrictions. You can use homebrews and other applications without any worries. It is also possible to install alternate operating systems on your Nintendo Switch. The only thing you need is a modchip and some knowledge of how it works.

R4i SDHC 3DS RTS Mod Chip – R4i 3DS RTS Card is a powerful tool for playing games on Nintendo DS Lite, DSi, DSi XL and 3DS consoles. It can support all versions of Nintendo DS games and even play NDS games from different regions at the same time.

It supports up to 4GB memory size and has built-in USB port for easy file transfer between PC and console. The R4i 3DS RTS card is compatible with all versions of Nintendo DS, including the latest V1.4.5u firmware update released in January 2011.

Conclusion

There is no doubt that you are looking for a guidance on how to use switch with modchip as well as which switch is the best modchip for you. The guide above will help you get started and determine which modchip is the best.