Installation of a new garage door and the removal of the previous one is not an easy task. Handling torsion springs and dealing with the weight of the door can be dangerous activities. In terms of installation, garage doors vary significantly. You can reach out to those stores that cater to these activities and become famous for their professionalism. If you are a home-handy individual, you may also give it a try.
However, thorough research is fundamental before initiating the project. Different DIY tricks are available on the Internet to help you in this regard. However, dealing with torsion springs and other technologies of installation is not easy.
Begin with cleaning the garage
Before initiating the project, ensure that there is a clear and safe space for working. Ensure the proper organization of every tool and equipment inside the area. Make sure that the floor is clean and there is nothing over which you can trip. Broken glasses, scattered nails, and falling pieces will add to the danger.
Remove the previous door
If the previous door has a torsion spring, removing the entrance alone is not an option. It is because the spring may cause severe injury if handled casually. Hence, you may require the help of professionals to manage this part. These individuals who come with experience can remove the door without you having to worry about it.
Inspection and preparation of the frame
After the removal of the previous door, you have to check for rotting inside the frame. You have to replace the wood so that the new gate does not develop mold and mildew. After the removal and installation of the structure, you are all ready to install the new piece. You have to choose a square and solid frame for the installation of the new door. Hence, you have to invest your time checking the door frame and selecting the best one for your garage.
Study the layout of every piece of the door
Before initiating the process, study the instruction diagram in detail. The door pieces need to be studied in detail before you start the configuration. When you fully assemble the parts in proper order, you can commence the procedure. The Chicago Garage Door comes with a manual that is quite helpful.
Fastening and hardware
The door to the garage is an essential aspect of the house. It secures the structure and the car. Even the children may spend a good deal of their time playing in the outside area of the garage. Thus, purchasing hardware approved by manufacturers is vital. Use new hardware and fasten them tightly. You must be extra careful at this stage. When you fully assemble the door, check for any loose nails and gaps. You will not want the door to fall on the car. Hence, fastening and hardware become fundamental.
You have to take care of the spring adjustment by following the instructions in the manual. A proper balance of the door is necessary if you desire to get the best value on your investment. A final inspection is also required so that you can keep everything in proper order.